Publicidad
Idiomas disponibles
Idiomas disponibles
Analog Radio
The unit switches to FM alarm automatically when receiving an alarm signal
from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select FM or AM.
2
Press S / T to search for a station automatically.
(or)
Press and hold S / T until "M" flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
"MEMORY" appears once the station is stored.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press
.
2
Turn the volume knob to select a preset number, then press the knob.
Other settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
[TUNER SETTING]
[SSM]
[SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Automatically presets up to 18
stations for FM. "SSM" stops flashing when the first 6 stations are stored. Select
[SSM 07–12]/[SSM 13–18] to store the following 12 stations.
[LOCAL SEEK]
[ON]: Searches only FM stations with good reception. ; [OFF]: Cancels.
• Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.
[IF BAND]
[AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
.
Default: [XX]
9
ENGLISH
Publicidad
