Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Symptom
Remedy
"UNRESPONSIVE DEVICE"
Make sure the USB device is not malfunction and reattach
appears.
the USB device.
"USB HUB IS NOT
This unit cannot support a USB device connected via a USB
SUPPORTED" appears.
hub.
"CANNOT PLAY" appears.
Connect a USB device that contains playable audio files.
• The source does not
The USB port is drawing more power than the design limit.
change to "USB" when
Turn the power off and unplug the USB device. Then, turn
you connect a USB device
on the power and reattach the USB device.
while listening to another
If this does not solve the problem, turn the power off and
source.
on (or reset the unit) before replacing with another USB
• "USB ERROR" appears.
device.
The iPod/iPhone does not
• Check the connection between this unit and iPod/iPhone.
turn on or does not work.
• Disconnect and reset the iPod/iPhone using hard reset.
"LOADING" appears when
This unit is still preparing the iPod/iPhone music list. It
you enter search mode by
may take some time to load, try again later.
pressing
.
"NO DISC"
Insert a playable disc into the loading slot.
"NO DEVICE"
Connect a device (USB/iPod/iPhone), and change the
source to USB/iPod USB again.
"iPod ERROR"
• Reconnect the iPod.
• Reset the iPod.
• Press and hold B SRC to turn off the power. Turn the
power on again for error recovery.
"MEMORY FULL"
You have reached the maximum storage limit of your
iPod/iPhone.
Symptom
Remedy
No Bluetooth device is
• Search from the Bluetooth device again.
detected.
• Reset the unit. (Page 4)
Bluetooth pairing cannot
• Make sure you have entered the same PIN code to both
be made.
the unit and Bluetooth device.
• Delete pairing information from both the unit and
the Bluetooth device, then perform pairing again.
(Page 15)
Echo or noise is heard during
• Adjust the microphone unit's position. (Page 14)
a phone conversation.
• Check the [ECHO CANCEL] setting. (Page 17)
Phone sound quality is poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
Phone call sound cannot be
• Press
heard from the car speakers.
and private talk mode. (Page 16)
Voice calling method is not
• Use voice calling method in a more quiet environment.
successful.
• Reduce the distance from the microphone when you
speak the name.
• Make sure the same voice as the registered voice tag is
used.
Sound is being interrupted or
• Reduce the distance between the unit and the Bluetooth
skipped during playback of a
audio player.
Bluetooth audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the
unit.
The connected Bluetooth
• Check whether the connected Bluetooth audio player
audio player cannot be
supports Audio/Video Remote Control Profile (AVRCP).
controlled.
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
during a call to switch between hands-free
35
ENGLISH
Publicidad
