Publicidad
Idiomas disponibles
Idiomas disponibles
Installation/Connection
Installing the unit (in-dash mounting)
Orientate the trim
plate as illustrated
Installing the unit (without mounting sleeve)
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws
(commercially available).
Self-tapping screw type
Use only the specified screws. Using wrong screws might damage
the unit.
38
ENGLISH
Hook on the top side
before fitting.
Bend the appropriate tabs to hold the
sleeve firmly in place.
Removing the unit
Do the required wiring.
(Page 39)
Dashboard of
your car
Publicidad
