Descargar Imprimir esta página

JVC KD-DB922BT Manual De Instrucciones página 42

Ocultar thumbs Ver también para KD-DB922BT:

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
Symptom
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
The unit does not work at all.
Correct characters are not
• This unit can only display uppercase letters, numbers,
displayed.
• Depending on the display language you have selected
DAB reception is poor.
"CHK ANTENNA"
"RELATED SERV FOUND"
• Press the volume knob to activate Soft-Link.
• Press
• Radio reception is poor.
• Static noise while listening
to the radio.
34
ENGLISH
Remedy
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Reset the unit. (Page 4)
and a limited number of symbols.
(page 6), some characters may not be displayed
correctly.
Make sure [ON] is selected for [DAB ANT POWER].
(Page 8)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT POWER] to [OFF].
(Page 8)
(Page 8)
to cancel.
Connect the antenna firmly.
Symptom
Remedy
Disc cannot be ejected.
Press and hold
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit (page 4).
Noise is generated.
Skip to another track or change the disc.
"IN DISC" appears and disc
Make sure nothing is blocking the loading slot when you
cannot be ejected.
eject the disc.
"PLEASE EJECT" appears.
Press , then insert the disc correctly.
Playback order is not as
Optical disc, the files are played in the order which they
intended.
were recorded.
USB device, the folders are played in the order of creation
(date and time). The files within each folder are played in
the order of the file name (alphabet).
Elapsed playing time is not
This depends on the recording process earlier (disc/USB).
correct.
"NOT SUPPORT" appears
Check whether the track is a playable format.
and track skips.
(Page 32)
"READING" keeps flashing.
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the device (USB/iPod/iPhone).
"UNSUPPORTED DEVICE"
• Check whether the connected USB device is compatible
appears.
with this unit and ensure the file systems are in supported
formats. (Page 32)
• Reattach the USB device.
to forcibly eject the disc. Be careful not

Publicidad

loading