Fronius TransTig 2200 Comfort Manual De Instrucciones página 197

Diagnóstico de errores, solución de errores
Generalidades Las fuentes digitales de corriente están provistas de un sistema inteligente de se-
guridad; por este motivo se pudo prescindir totalmente de cortacircuitos fusibles
(con la excepción del fusible de la bomba de refrigerante). Después de corregir
un posible error, sin tener que cambiar cortacircuitos fusibles, se puede volver a
trabajar correctamente con la fuente de corriente.
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger due to insufficient ground conductor connection.
This can result in serious personal injury and damage to property.
▶
▶
Códigos de ser- Cuando la pantalla muestre un mensaje de error que no figure entre los enume-
vicio mostrados rados aquí, el error solo podrá ser solucionado por el Servicio Técnico. Apunte el
mensaje de error mostrado, junto con el número de serie y la configuración de la
fuente de corriente y llame al Servicio Técnico con una descripción detallada del
error.
El código de servicio mostrado se puede ocultar pulsando "OK". Si el error sigue
estando presente, se volverá a mostrar el código de servicio al cabo de un cierto
tiempo. Si se elimina un error desde el lado de la máquina, se deja de mostrar el
código de servicio.
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
WARNING!
Before starting work, switch off all devices and components involved and dis-
connect them from the grid.
Secure all devices and components involved so they cannot be switched back
on.
After opening the device, use a suitable measuring instrument to check that
electrically charged components (such as capacitors) have been discharged.
WARNING!
The housing screws provide a suitable ground conductor connection for
grounding the housing.
The housing screws must not under any circumstances be replaced by other
screws without a reliable ground conductor connection.
197