JUKI MS-1190/V045 Manual De Instrucciones página 34

SPECIFICATIONS
Model
Application
Number of needle
Sewing speed
Needle
Height of presser foot
Feed system
Stitch length
Needle gauge
Circumference of cylinder
Lubricating oil
- Equivalent continuous emis-
sion sound pressure level
(L
pA
A-weighted value of 81.5
dB; (Includes K
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000
Noise
sti/min.
- Sound power level (L
A-weighted value of 89.5 dB;
(Includes K
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000
sti/min.
Model
Application Cloth puller for light- to extra-heavy-weight materials
Cloth puller type Upper roller feed
1. SETTING UP THE SEWING MACHINE
!3
!2
1
5
4
6
7
!5
8
9
2
MS-1190/V045
For light-weight materials
ORGAN TV x 64-NY #8 to #14
(standard #12)
SCHMETZ B-64 Nm. 60 to Nm. 90
(standard Nm. 80)
Intermittent feed by means of a one-touch utility clutch Link rate adjustable
- Equivalent continuous emis-
sion sound pressure level
) at the workstation: (L
A-weighted value of 80.0
= 2.5 dB); dB; (Includes K
pA
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000
sti/min.
);
WA
= 2.5 dB);
WA
V045
Upper/lower roller feed
3
4
!1
!4
MS-1190/V046
2
Max. 4,000 sti/min (normal 3,500 sti/min)
10 mm
1.2 to 3.2 mm (with a cloth puller)
1/8", 5/32", 3/16", 7/32", 1/4")
171 mm
JUKI New Defrix Oil No.1
- Equivalent continuous emis-
sion sound pressure level
) at the workstation: (L
pA
A-weighted value of 81.5
= 2.5 dB); dB; (Includes K
pA
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000
sti/min.
- Sound power level (L
A-weighted value of 90.5 dB;
(Includes K
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000
sti/min.
V046
1) When carrying the sewing machine, be sure to carry by
two people.
(Caution) Do not hold the pulley.
2) Do not place a protruding object, such as a screw driver,
at a place where the sewing machine is to be installed.
3) Attach belt dodging base 1 to the sewing machine with
!0
hexagon head bolt 2 .
4) Put the sewing machine on the table and determine its
position (belt groove and through hole 3 for passing
the presser bar lifter chain).
5) Attach two machine head support plates 4 to the
sewing machine by means of screw 5 . Fix the plates
on the table by means of hexagonal bolt 6 , washer 7 ,
spring washer 8 and nut 9 .
6) Place a level on bed side plate !0 in a lateral direction
and a longitudinal direction to check that the sewing
machine is properly placed in a horizontal position.
7) Install belt cover !1 , V belt, belt cover lid !2 , and top
cover ! 3 on the sewing machine and fix them with
screws !4 and !5 .
When installing the belt over, temporarily tighten the
screw fi rst. Then, securely tighten the screw after the
installation of all related parts.
– 1 –
MS-1190M/V045
For medium-weigth materials
ORGAN TV x 64-NY #12 to #19
(standard #16)
SCHMETZ B-64 Nm. 80 to Nm. 120
(standard Nm. 100)
- Equivalent continuous emis-
sion sound pressure level
) at the workstation: (L
pA
A-weighted value of 80.0
= 2.5 dB); dB; (Includes K
pA
according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000
sti/min.
);
WA
= 2.5 dB);
WA
MS-1190M/V046
) at the workstation:
pA
= 2.5 dB);
pA