OHAUS 3000 Serie Instrucciones De Montaje página 160

EN-26
3.8.4 Stop Bit
Set the number of stop bits.
1 = 1 stop bit.
2 = 2 stop bits.
3.8.5 Handshake
Set the flow control method.
NONE = no handshaking.
ON-OFF = XON/XOFF software handshaking.
3.8.6 Print Stable Data Only
Set the print critera.
OFF = values are printed immediately.
ON = values are only printed when the stability criteria are met.
3.8.7 Auto Print
Set the automatic printing functionality.
OFF = disabled.
ON.StAb = printing occurs each time the stability criteria are met.
INtEr = printing occurs at the defined interval.
CONt = printing occurs continuosly.
When INtEr is selected, set the Print Interval.
1 to 3600 (seconds)
3.8.8 Content
Select the additional content of the printout.
GROSS OFF = Gross weight is not printed.
ON
NET OFF = Net weight is not printed.
ON
TARE OFF = Tare weight is not printed.
ON
UNIT OFF = Unit is not printed.
ON
3.8.9 End Print
Advance to the next menu.
= Gross weight is printed.
= Net weight is printed.
= Tare weight is printed.
= Unit weight is printed.
3000 Series Indicators