H O W T O U S E Y O U R M Ini C H Opper - Oster 3320 Manual De Instrucciones

H O W T O U S E Y O U R M INI C H OPPER

ASSEMBLING THE UNIT
1. Remove all packaging materials before using.
2. Before using, wash lid, blade and bowl in warm soapy water; rinse and dry thoroughly,
see CARE AND CLEANING.
3. On a flat surface place the bowl, without lid and chopping blade, on the base and turn
clockwise to lock into position.
NOTE: Rotate the bowl until it snaps into place.
4. Slide the chopping blade down over the shaft, rotating if necessary to drop into place.
5. Place the lid on the bowl, then turn clockwise into lid locking slot. Continue turning
the lid into the lid locking slot as far as it will go so that the dot on the lid lines up
with the dot on the base.
NOTE: For your protection, this unit has a safety lock lid. The unit will not operate unless
the lid and base dots align. Do not attempt to operate the unit without locking the lid in
place.
CHOPPING
1. Cut food into approximately 1.5 cm (1/2 inch) pieces and place up to 3 cups of dry food
in the bowl at a time.
2. Place the lid on the bowl and turn to lock into place.
3. Plug the cord into an outlet. Press and hold the HI or LO Pulse button for 5-10 seconds
and then release; the motor will stop. Repeat for a finer consistency.
4. When finished chopping, allow chopping blade to stop rotating before removing
contents.
5. Remove the lid and grasp the stem of the chopping blade. Carefully remove it from
the bowl. Remove the bowl from the base and empty the processed food.
NOTE: Do not use bowl for storing food.
4