JOCCA 2168 Manual De Instrucciones página 6

EN English
The following functions can be controlled by both the
fan buttons and the remote control.
- Press the POWER button to turn the fan ON and OFF .
- Pressing the SPEED button will make the fan speed
up or down. The LED light on the top of the fan will
illuminate with the selected speed.
- With the SPEED button you can select 3 speeds:
- Low Air Level – LO
- Mean Air Level- MI
- High air level - HI
- Press OSC button will select oscillation option. The fan
has an oscillation angle of 75º.
- By pressing the MODE button, the Nature and Sleep
operating modes can be selected instead of the normal
mode. In these operating modes, the fan speed will be set
according to the built-in schedule and the unit will ignore
the speed, which has been set by the SPEED button.
- Nature Mode: The fan will run according to a set program
imitating the wind, alternating speeds High, Medium, Low
and Stop.
- SLEEP mode: ventilation will be weaker and quieter.
- By pressing the TIMER button you can set the shutdown
time from 0.5 hours to 7.5 hours.
- Unplug the appliance from the mains whenever you
have finished using it.
CLEANING AND STORAGE
- Before cleaning, please ensure that the appliance is disconnected from the mains
electricity supply.
- Clean the appliance firstly with a slightly dampened cloth and then with a dry cloth.
- Clean the grid from time to time with a brush to eliminate any dust that might have
accumulated on the same.
- Please do not use abrasive detergents or products that might damage the appliance.
- Please use a damp cloth to clean the motor base.
- NEVER SUBMERGE THE MOTOR BASE IN WATER OR ANY OTHER
LIQUID.
- Store the appliance in a dry place.
6