Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 24 Tuesday, December 20, 2022 10:47 AM
24 OPERATION
NOTE
• For best results, press buttons in the center, even when activating a button's secondary function. The
buttons may not work properly if pressed too far from the center.
Changing Oven Settings
Clock
The clock must be set to the correct time of day in
order for the automatic oven timing functions to
work properly.
Model LSGL5833*, LSGL583CF
1
Set the oven mode knob to the Off position.
2
Press Cook Time for 3 seconds. CLO shows in
the display.
3
Press plus(+) or minus(-) to select the desired
time.
4
Press START.
Model LSGL5831*
1
Press Clock
2
Press plus(+) or minus(-) to select the desired
time.
3
Press START.
NOTE
• The time of day cannot be changed during a
timed baking or self-clean cycle.
• If no other keys are pressed within 25 seconds of
pressing Clock, the display reverts to the
original setting.
• If the display time is blinking, there may have
been a power failure. Reset the time.
Oven Light
The interior oven light automatically turns on
when the door is opened.
• Press Light to manually turn the oven light on.
NOTE
• The oven light cannot be turned on if the Self
Clean function is active.
• The oven light turns off automatically after 90
seconds.
Timer On/Off
The Timer serves as an extra timer in the kitchen
that beeps when the set time has run out. It does
not start or stop cooking.
The Timer feature can be used during any of the
other oven control functions.
1
Set the oven mode knob to the Off position.
(Model LSGL5833*, LSGL583CF)
2
Press Timer On/Off once to set hours:
minutes. The display shows 0:00 with HR
letters inside and Timer flashes. Press Timer
On/Off twice to set minutes:seconds.
3
Press plus(+) or minus(-) to select the desired
time.
4
Press Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
NOTE
• If Timer On/Off is not pressed, the timer returns
to the time of day.
Publicidad
