Publicidad
Idiomas disponibles
Idiomas disponibles
MODE SELECTION:
AUTO MODE
Press the MODE button to select Auto Mode. The unit changes between
Colour Jumping Mode and Colour Fading Mode automatically. The colour
jumping/fading speed can be preadjusted by the speed of the Colour
Jumping and Colour Fading Modes.
SLAVE MODE
Press the MODE button to enter the Slave Mode.
Link the slave unit and the master unit via DMX cable. The slave unit will
follow in sequence with the master unit. Press ENTER to confirm.
SOUND CONTROL MODE
Press the MODE button to select Sound Control Mode. The unit will follow
the beat of the music thanks to the built in microphone. Press ENTER (3.
and 4. digit blink) again to adjust microphone sensitivity (00-99) by using
UP and DOWN buttons. Press ENTER to confirm.
DMX MODE SELECTION
Press the MODE button to enter DMX MODE SELECTION (repeatedly if ne-
cessary). Press ENTER (1st digit blinks). Press value UP or DOWN button
to select the desired DMX Mode. Press ENTER again to confirm.
DMX ADDRESS SETTING MODE
Press the MODE button to enter DMX Address Setting Mode.
Press ENTER to access edit mode (the last 3 digits will blink). Use the UP
and DOWN buttons to set the DMX address (A001 - A512). Press ENTER
to confirm
The LED display automatically turns off after 20 seconds and turns on
again by pressing any of the 4 buttons.
11
Publicidad
