JUMO flowTRANS MAG H20 Manual Breve página 42

4 Technical data
4.2 Interfaces
4.2.1 Bluetooth
Communication
Authentication
Connection status (configurable)
Range
Radio frequency
Bluetooth radio module
NFC tag
Max. transmission power
Bluetooth radio module
NFC tag
App
Functions
System requirements
iOS device
Android device
4.2.2 SPE
Function
Voltage supply
Input voltage
Current consumption
Power consumption
Protection rating
Electrical safety
Requirements
SPE protocol
Data transfer rate
(10BASE-T1L)
PoDL class
Plug connectors
Version
Protection rating
Connection line
Version
Bandwidth
Line length
DC loop resistance
10
Via mobile end device with the "JUMO smartCONNECT" app
Via NFC
Active
Inactive
Restricted (can be activated via NFC)
10 m (open space)
2.45 GHz
13.56 MHz
0 dBm
–
Transfer of configuration data and device information, display of process val-
ues
Minimum requirement iPhone 7 with iOS 13
Minimum requirement Android 8.0
Transfer of process data, configuration data, and device information
IEEE 802.3cg
DC 18 V to 30 V PELV
≤ 100 mA
≤ 1.8 W
DIN EN 61140, Class III (protective low voltage)
The device must be equipped with an electrical circuit that meets the require-
ments of DIN EN 61010-1, DIN EN 61010-2-201, and Low Voltage Directive
2014/35/EU with regard to "Limited-energy circuits".
Modbus TCP/IP, integrated JUMO Cloud connector
10 Mbit/s
Class 11, IEEE 802.3cg
IEC 63171-5
M12, 2-pole, shielded
IP67
IEC 61156-13, IEC 61156-14
2-core, copper, shielded
≥ 20 MHz
≤ 500 m (AWG18)
< 25 Ω