Features; Assembly - Ryobi CSB143LZ Manual Del Operador

PRODUCT SPECIFICATIONS
Blade Diameter ......................................................7-1/4 in.
Blade Arbor .............................................................. 5/8 in.
Cutting Depth at 0º ..............................................2-7/16 in.
Cutting Depth at 45º ..............................................1-7/8 in.
Cutting Depth at 51.5º .......................................1-11/16 in.
kNOw yOUR CIRCULAR SAw
See Figure 1, page 16.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BLADE wRENCH STORAGE
Convenient wrench storage for quick blade changes.
DUST CHUTE
To direct saw dust and chips away from the operator, a dust
chute is located on the side of the upper blade guard.
EDGE GUIDE
The edge guide is used when making long or wide rip cuts
with the saw.
UNPACkING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
wARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

No Load Speed .................................... 5,200 r/min. (RPM)
Input ....................................... 120 V, AC only, 60 Hz, 14 A
Net Weight .............................................................. 7.9 lbs.
Laser Guide ........................ Class IIIa, <5mW max, 650nm
ERGONOMIC DESIGN
The design of your circular saw provides for maintaining
proper two hand control when cutting. It has been designed
to be comfortable and easy to grasp.
LASER GUIDE
When turned on, the laser guide will generate a red laser
beam on the work surface in front of the saw.
SPINDLE LOCk
The spindle lock allows you to secure the blade when turning
the blade screw.
SwITCH
Your circular saw is equipped with a pre-travel safety switch
which reduces the possibility of accidental starting. When
you depress the switch, the saw will not start until you reach
the pre-travel position. You must depress the switch fully to
activate the saw.

ASSEMBLy

PACkING LIST
Circular Saw
7-1/4 in. Blade
Blade Wrench
Tool Bag
Edge Guide
Operator's Manual
wARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
wARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
8 - English