Descargar Imprimir esta página

Jocel JCV-380LNFI Manual De Instrucciones página 48

Ocultar thumbs Ver también para JCV-380LNFI:

Publicidad

Idiomas disponibles

Idiomas disponibles

the doors are close, the display gets extinguished automatically if no key operation within 3 minutes.
When the display is off, it will light up if any door is opened or any key is pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the
display. (Refer to 1.6 for unlocking the keys)
1. FUNCTIONS
1.1 Switchover between fridge/freezer mode
Press and hold the '-'key for 3s, then switchover between the fridge mode and the freezer mode
can be realized.
1.2 Temp. Setting
Press the '+' or '-' for the first time, with the icon of Temp. flickering, and then press the '+' or '-'
key again to adjust the temperature to desired value, finally press the OK key or wait for 5s to
validate the above temperature setting.
Temperature setting ranges cycle as follows
In the fridge mode:2℃↔3℃↔4℃↔5℃↔6℃↔7℃↔8℃;
In the freezer mode:-16℃↔ -17℃↔ -18℃↔ -19℃↔ -20℃↔ -21℃↔ -22℃↔ -23℃↔ -24℃;
1.3 Fast Freezing
1) When the Fast Freezing function is enabled, the compartment temperature will be controlled
at -32℃ automatically, and after 26 hours of running, the Fast Freezing function gets exited.
Cooling down the freezer temperature in a rapid manner is beneficial to the prevention of
food nutrition against lost and the preservation of freshness.
Under the Fast-Freezing mode, the freezer temperature is subjected to no adjustment.
The Fast-Freezing function can be enabled only in the freezer mode.
2) Enabling the Fast Freezing function
• In the freezer mode, press the Function key to select Fast Freezing until the corresponding
icon gets flickering, and then press the OK/Lock key within 5s for confirmation. If the
OK/Lock key is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast Freezing function
• "After a cumulative running period of 26 hours, the Fast Freezing function will exit
automatically.
• Under the Fast Freezing mode, press the Function key to select Fast Freezing until the
corresponding icon gets flickering, and then press the OK/Lock key for confirmation, the
Fast Freezing function will get exited.
1.4 Fast Cooling
1) When the Fast Cooling function is enabled, the compartment temperature will be controlled at
2℃ automatically. Cooling down the compartment temperature in a rapid manner is beneficial to
the prevention of food nutrition against lost and the preservation of freshness.
Under the Fast Cooling mode, the temperature is subject to no change.
48

Publicidad

loading