Publicidad
Idiomas disponibles
Idiomas disponibles
The Fast-Cooling function can be enabled only in the fridge mode.
2) Enabling the Fast Cooling function
• In the fridge mode, press the Function key to select Fast Cooling until the corresponding icon
gets flickering, and then press the OK/Lock key within 5s for confirmation. If the OK/Lock key
is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast Cooling function
• Under the Fast Cooling mode, press the Function key to select Fast Cooling until the
corresponding icon gets flickering, and then press the OK/Lock key for confirmation, the Fast
Cooling function will get exited.
1.5 Child Lock
1) When the Child Lock function is enabled, the temperature and function are subjected to no
change to prevent maloperation.
2) In case of no key operation within 3 minutes, the Child Lock function will be enabled
automatically.
3) Enabling/exiting the Child Lock function manually
• Press and hold down the OK/Lock for 3s, then the Child Lock function can be
enabled/disabled
1.6 Door open alarm
If any door is open for more than 3 minutes, buzzer alarms will be continuously issued, which
can be stopped when any key is pressed, but will be restored after 3 minutes if the door keeps
open. The alarms will not be lifted until the door is closed.
1.7 Power-cut memory
In case of power failure, the refrigerator will maintain the operating state before power failure
when power supply is restored.
1.8 Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time
power failure (i.e., less than 5 minutes), the compressor will not be started immediately after it is
powered on.
1.9 Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if it is set in the freezer mode and the compartment
temperature is higher than -10℃, digits of temperature get flickering on the display. The
temperature at which the system is energized can be displayed when any key is pressed, and
the normal display will be restored when any key is pressed again or after 5s.
1.10 Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the operation panel, it indicates fault with the
refrigerator. Please contact the aftersales person for visiting service in such case.
49
Publicidad
