Publicidad
Idiomas disponibles
Idiomas disponibles
ProCore Edge North America
The positive cable connects to the bus bar stud on the
right, and the negative cable connects to the bus bar
stud on the left, with a torque of 216.83 in.-lb.
(24.5 N-m).
Fasten the provided lower clamp to the DC output power cables,
with a torque of 53.1 in.-lb (6 N-m), to secure them for strain relief.
(Figure 19)
NOTE
Ensure, prior to fastening the lower clamp, that the
grey protective rubber sleeve (F
side of the DC output power cables.
31241-03-0202 Page 26 of 69
igure 19) is on the upper
Webasto Charging Systems, Inc.
IOMM
Publicidad
