Publicidad
Idiomas disponibles
Idiomas disponibles
IOMM
Buttons
NOTE
ProCore™ Edge starts charging automatically when
you connect a vehicle. You can disconnect a vehicle
safely from ProCore™ Edge even while charging. You do not
need to start or stop the charge with the following buttons.
Button
Function
Start
•
•
Stop
•
Webasto Charging Systems, Inc.
If the charger is in the Charge Stopped state,
then press the Start button (Figure 23)
momentarily to restart the charge.
Press and hold the Start button for three
seconds to switch from the graphical battery
display (Figure 23) to the alternate tabular
battery display (Figure 24). Press and hold the
Start button for three seconds again to switch
back to the graphical battery display.
Press the Stop button (Figure 23)
to stop the charge. The charger displays,
on the status bar, "Charge Stopped."
ProCore Edge North America
Page 41 of 69 31241-03-0202
Publicidad
