Publicidad
Idiomas disponibles
Idiomas disponibles
If the sensor cable(s) is not installed in the cable guard, refer to the instructions supplied with the
cable guard to install the sensor cable(s) in the cable guard and attach the sensor cables and cable
guard.
Note: For measurements in water where large changes in the water depth can occur (e.g., wells and reservoirs),
attach the optional cable guard extension (item 1,
Figure 3
on page 10) and then the cable guard to the sensor.
Refer to the instructions supplied with the cable guard extension.
Figure 4 Attach the cable guard
English 11
Publicidad
