If laser radiation hits your eye, you must close your
u
eyes and immediately turn your head away from the
beam.
Do not make any modifications to the laser equip-
u
ment.
Do not use the laser goggles (accessory) as protective
u
goggles. The laser goggles make the laser beam easier to
see; they do not protect you against laser radiation.
Do not use the laser goggles (accessory) as
u
sunglasses or while driving. The laser goggles do not
provide full UV protection and impair your ability to see
colours.
Have the measuring tool serviced only by a qualified
u
specialist using only original replacement parts. This
will ensure that the safety of the measuring tool is main-
tained.
Do not let children use the laser measuring tool unsu-
u
pervised. They could unintentionally blind themselves or
other persons.
Do not use the measuring tool in explosive atmo-
u
spheres which contain flammable liquids, gases or
dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
Keep the measuring tool and the magnetic
accessories away from implants and other
medical devices, e.g. pacemakers or insulin
pumps. The magnets inside the measuring tool
and accessories generate a field that can impair
the function of implants and medical devices.
Keep the measuring tool and the magnetic accessor-
u
ies away from magnetic data storage media and mag-
netically sensitive devices. The effect of the magnets in-
side the measuring tool and accessories can lead to irre-
versible data loss.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines and plumb points.
Technical Data
Point and line laser
Article number
A)
Working range
– Laser line
– Laser point facing up
– Laser point facing down
B)C)
Levelling accuracy
Bosch Power Tools
The measuring tool is suitable for indoor and outdoor use.
This product is a consumer laser product in accordance with
EN 50689.
Product Features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Laser beam outlet aperture
(2) Battery warning
(3) Pendulum lock indicator
(4) Laser point operating mode button
(5) Laser line operating mode button
(6) Battery compartment cover
(7) Locking mechanism of the battery compartment
cover
(8) Guide groove
(9) On/off switch
(10) 1/4" tripod mount
(11) 5/8" tripod mount
(12) Serial number
(13) Laser warning label
(14) Rotating mount (RM 1)
(15) Guide rail
(16) Fastening slot
(17) Magnet
a)
(18) Ceiling clip
a)
(19) Universal holder (BM 1)
a)
(20) Laser target plate
a)
(21) Case
a)
(22) Inlay
a)
(23) Tripod (BT 150)
(24) Telescopic shaft (BT 350)
a)
(25) Protective bag
a)
(26) Laser viewing glasses
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GCL 2-15
3 601 K66 E..
15 m
10 m
10 m
English | 17
a)
GCL 2-15 G
3 601 K66 J..
15 m
10 m
10 m
1 609 92A 8E9 | (20.03.2023)