Installation; Mounting Diagram - PRESIDENT JOHNSON II Manual Del Usuario

Ocultar thumbs Ver también para JOHNSON II:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Welcome to the world of the new generation of CB
radios. The new PRESIDENT range gives you access to
top performance CB equipment. With the use of up-to-
date technology, which guarantees unprecedented
quality, your PRESIDENT JOHNSON II ASC is a new step in
personal communication and is the surest choice for the
most demanding of professional CB radio users. To en-
sure that you make the most of all its capacities, we
advise you to read carefully this manual before installing
and using your PRESIDENT JOHNSON II ASC.
A) INSTALLATION:
1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO:
a) You should choose the most appropriate setting from a simple and practical
point of view.

MOUNTING DIAGRAM

b) Your CB radio should not interfere with the driver or the passengers.
c) Remember to provide for the passing and protection of different wires (e.g.
power, antenna, accessory cabling) so that they do not in any way interfere
with the driving of the vehicle.
d) To install your equipment, use the cradle (1) and the self-tapping screws [2]
provided (drilling diameter 3.2 mm). Take care not to damage the vehicle's
electrical system while drilling the dash board.
e) Choose where to place the microphone support and remember that the
microphone cord must stretch to the driver without interfering with the controls
of the vehicle.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido