PRESIDENT JOHNSON II Manual Del Usuario página 32

Shows transmission
SCAN scan function activated
AM AM mode selected
FM FM mode selected
HI-CUT HI-CUT filter activated
ASC Automatic Squelch Control activated
DW Dual Watch activated
NB/ANL NB and ANL filters activated (in FM mode, only NB filter is active)
LOCAL Automatic adjustment of RF GAIN activated
UK Shows the England configuration (see table on page 47)
EMG the priority channel (emergency) 19 or 9 activated from CH 19/9
button
MEM Memory function (input datas, recall or delete) activated
Function key activated (selection of the frequency bands)
Shows the channel number
Shows the selected configuration
4) CHANNEL SELECTOR:      and      keys on front panel and
«UP» and «DN» on the microphone
These keys allow to go up and down the channels. A beep is heard each time
you change the channel if the Beep function is activated (see § 5)
5) CH 19/9 BUTTON ~ BEEP
CH 19/9 BUTTON
(short push)
Channels 19 and 9 are automatically selected by pressing this key. A push
activates channel 19 and «EMG» appears on the display. A second push
activates channel 9. «EMG» is still displayed. A new push returns to the previous
configuration and «EMG» disappears.
BEEP
(long push)
A longer push (1s) allows to activate the Beep function (keys, channel
changing etc.) «bP on» appears shortly on the display. In order to disable the
Beep, push again during 1s on the key. «bP oF» appears shortly on the display.
6) HI-CUT ~DW ~ M3
HI-CUT
(short push)
Suppression of high frequency interferences. To use according to the receiv-
ing conditions. A short pressure activates the HI-CUT filter and «HI-CUT»
appears on the display. A new push disables the function and «HI-CUT»
disappears.
DW
(long push)
A longer push (1s) allows to activate the Dual Watch function. This function
allows to survey between channel 19 or 9 and the selected channel. A new
long push activates the DW function between channel 19 and the busy
channel. «DW» is displayed. A new push activates the function between
channel 9 and the busy channel. The number of the selected channel and
channel 19 or 9 appear alternately on the display. The «EMG» icon is also
displayed at the same time as channel 19 or 9. The selected channel can be
modified during the dual watch. The function can also be disabled by pushing
the PTT, CH19/9 or SCAN keys.
M3
(see § 9)
7) NB/ANL ~ SCAN ~ M2
NB/ANL
(short push)
Noise Blanker/Automatic Noise Limiter. These filters allow to reduce the
background noise and some receiving interferences. A push activates the
filters. «NB/ANL» appears on the display.
In FM mode, only the NB filter is active.
SCAN
(long push)
Scan of the channels
Allows activating the SCAN function (scanning the channels) in upward
direction. «SCAN» is displayed. The scanning stops as soon as there is a busy
channel. The scanner starts automatically 3 seconds after the transmission
stops and no key is pressed during 3 seconds. The scanning restarts also in
upward direction with the  key of the channels or UP on the microphone, or
in a downward direction with the  key of the channels or DN on the
microphone.
Scan of the memories
In order to activate this function :
32