HTW -GRLC10 Manual De Usuario E Instalacion página 55

1 ZONE TYPE = ONE and
ROOM THERMOSTAT = NON
2 ZONE TYPE = ONE and
ROOM THERMOSTAT = NON
3 ROOM THERMOSTAT = MODE SET
4 ROOM THERMOSTAT = MODE SET
5 ROOM THERMOSTAT = ONE ZONE
6 ROOM THERMOSTAT = ONE ZONE
Refer to "FUNCTION PARAMETER SET"> "TEMP.TYPE SET" and "ROOM THERMOSTAT SET" for the
settings in "Installation and owner's manual".
The system has the function including floor heating and domestic water:
Outdoor
Home page 2
If ZONE TYPE = ONE and ROOM THERMOSTAT = NON and SINGLE ZONE OPERATION SET = 3 are
set, home page 2 will appear:
Target or real room temp.
Refer to "FUNCTION PARAMETER SET" » "TEMP.TYP E SET" and "ROOM THERMOSTAT SET" in
"Installation and owner's manual".
The system has the function including floor heating and domestic water:
Table 1
SINGLE ZONE OPERATION SET = 0
SINGLE ZONE OPERATION SET = 1
Wire
controller
Indoor
SV1
M
01-01-2022
2.0bar
23:00
°c
26.5
ON
5
SINGLE ZONE RT OPERATION = 0
SINGLE ZONE RT OPERATION = 1
SINGLE ZONE RT OPERATION = 0
SINGLE ZONE RT OPERATION = 1
FHL1
°
10
°c
32
······
FHLn
FHL2