HTW -GRLC10 Manual De Usuario E Instalacion página 65

5.4 Adjusting space operation mode
Adjusting space operation mode by interface

Go to " " » "OPERATION MODE SET". Press "OK", the following page will appear:
There are three modes to be selected including HEAT, COOL and AUTO mode. Use the"

or " " to scroll, press "OK" to select.
Even if you don't press OK button and exit the page by pressing BACK button, the mode
would still be effective if the cursor had been moved to the operation mode.
If there is only HEAT mode to be effective, the other modes (COOL and AUTO) can't be select.
If there is only COOL mode to be effective, the other modes (HEAT and AUTO) can't be select.
Automatically changed by the software based on the outdoor temperature (and depending on
installer settings of the indoor temperature), and takes monthly restrictions into account.
15
"