HTW -GRLC10 Manual De Usuario E Instalacion página 70

There are 6 timers to be set.
Use " "、" "、" " and " " to scroll and use to " "、" " adjust the time, the
mode and the temperature.
Move to "N", press " " to change "N" to "Y", and then press " " to change "Y" to "N" again.
"Y" is to enable the timer; "N" is to disable the timer.
If you set the start time is the same as the end time or the temperature out of range of the mode,
the following page will appear:
And then press "OK", you can reset the timer. You must set the timer correctly or cancel the
20