Publicidad
Idiomas disponibles
Idiomas disponibles
i INFORMATION
TEMP. CURVE SET have four kinds of curves :
1. the curve of the high temperature setting for
heating; 2. the curve of the low temperature
setting for heating; 3. the curve of the high
temperature setting for cooling; 4. the curve of
the low temperature setting for cooling.
It only has the curve of the high temperature
setting for heating, if the high temperature is set for
heating.
It only has the curve of the low temperature
setting for heating, if the low temperature is set for
heating.
It only has the curve of the high temperature
setting for cooling, if the high temperature is set for
cooling.
It only has the curve of the low temperature
setting for cooling, if the low temperature is set for
cooling.
See "FUNCTION PARAMETER SET"» "COOL
MODE SET" and "HEAT MODE SET" in
"Installation and owner's manual".
The desired temperature (TB) can't be
adjusted directly, when the temperature curve is
valid.
•
If you want to use heat mode in zone 1(namely zone A), you select "LOW TEMP. FOR ZONE-A
HEAT". If you want to use cool mode in zone 1(A), you select "LOW TEMP. FOR ZONE-A HEAT". If
you press "OK", there are 9 curves to be select by pressing "
•
If TEMP. CURVE SET is activated; the desired temperature cannot be adjusted on the
interface. Press "
" or "
appear:
Move to "NO", press "OK" to come back to home page, move to "YES", press "OK" to reset the
TEMP. CURVE SET.
" to adjust the temperature on home page. The following page will
17
" or "
".
Publicidad
