HTW -GRLC10 Manual De Usuario E Instalacion página 83

6.8 FUNCTION PARAMETER SET
6.8.1 About FUNCTION PARAMETER SET
FUNCTION PARAMETER SET is used for installer and service engineer.
• Setting the function of the unit.
• Setting the parameters.
6.8.2 How to go to FUNCTION PARAMETER SET
Go to" " » "FUNCTION PARAMETER SET ". Press "OK".
• The FUNCTION PARAMETER SET is used for installer or service engineer. It is NOT intended
the home owner alters setting with this menu.
• It is for this reason password protection is required to prevent unauthorized access to the
service settings.
• The password is 1212.
6.8.3 How to exit FUNCTION PARAMETER SET
If you have set all the parameters, Press "BACK", the following page will appear：
33