HTW -GRLC10 Manual De Usuario E Instalacion página 80

i INFORMATION
A total of eight fault codes can be recorded.
CLEAR FAULT is used to clear all the faults or errors.
Use" " and "OK" to enter
Use "OK"、" "、"
6.7 PARAMETER VIEW
This menu is for installer or service engineer reviewing the operation parameter.
• At home page, go to "
• Press "OK". There are twelve pages for the operating parameter as following. Use "
"、" "、" " to scroll.
" to make a scroll and an adjustment.
" > " PARAMETER VIEW".
30
"、"