Toro Recycler 20357 Manual Del Operador página 6

136-5899
1. Push the handle down to
move forward.
136-9096
1. Attention—read the
Operator's Manual.
decal136-5899
2. Pull the handle up to move
backward.
decal136-9096
2. Scan the QR code for
more information on
traction adjustment.
Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
1
Unfolding the Handle
No Parts Required
Procedure
WARNING
Unfolding the handle improperly can damage
the cables, causing an unsafe operating
condition.
• Do not damage the cable(s) when folding
or unfolding the handle.
• Ensure that the cable(s) are routed to the
outside of the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Move the handle rearward to the operating
position (Figure
5
4).