DSC LC-151 Instrucciones De Instalación Y Manual De Usuario página 9

7. Release the detector body from the metal bracket by
pulling the detector up and out.
9. Insert wires through provided access hole and wiring
channels.
11. Place the detector on the mounting bracket from top
side down and then lock the screw at the bottom.
8. Attach the rear bracket to the wall using mounting
screws.
10. Attach the sealing sponge pad to the wire opening
from the rear side after the wires have been
connected and prior to final product affixing to the
mounted bracket.
12. If Pet immunity up to 15kg (33lb) is desired do not
install the LC-F1-15X mechanical pet filter.
If Pet immunity up to 36kg (80lb) is desired install the
LC-F1-15X mechanical pet filter.
9