Samsung NQ5B7993A Serie Manual Del Usuario página 409

Information codes
If the oven fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code Description
The temperature sensor is open.
C-20
The temperature sensor is short.
The steam sensor is open.
C-70
The steam sensor is short.
If there is no communication
C-F0 between the main and sub
MICOM.
Only occurs when EEPROM Read
C-F1
or Write is not working.
The auto door motor is
C-d4
malfunction.
This code appears when the
oven temperature high.
In case the temperature rises
C-21
over the limit temperature
during operation of each mode.
(Fire sensed.)
C-F2
The touch key is malfunction.
C-d0
Action
Unplug the power cord of
the oven, and contact a local
Samsung service centre.
Unplug the power cord for
cooling enough time, and restart
the oven.
Stop the oven and then try
again.
Unplug the power cord for
cooling enough time, and clean
the button. (Dust, Water)
When appear same problem,
contact a local Samsung service
centre.
Technical specifcations
SAMSUNG strives to improve its products at all times. Both the design
specifications and these user instructions are thus subject to change without
notice.
Power Source
Maximum power
Grill
Power Consumption
Convection
Steam
Cooling Method
Main unit
Dimensions
(W x H x D)
Built-in
Volume
Net
Weight
Shipping
* This product contains a light source of energy efficiency class <G>.
230 V ~ 50 Hz
2850 W
2550 W
2500 W
2850 W
Cooling fan motor
595 X 456 X 570 mm
560 X 446 X 549 mm
50 liter
33.4 Kg
41.1 Kg
English 43