Descargar Imprimir esta página

melitta AromaFresh Pro Manual Del Usuario página 21

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Display
Description
Language: Sets the language.
Service/information: Shows the appliance
counter and the software version.
The Factory setting function resets all
settings to the original values. The
appliance counters are not reset.
Exit: Exit the menu.
8 Cleaning the appliance
Regular cleaning and maintenance of the appli-
ance guarantee the consistent high quality of
your coffee.
Always allow the appliance to cool down
before cleaning it.
Attention! Unsuitable cleaning agents can
damage the appliance. Only use the recom-
mended cleaning agents.
8.1 Cleaning surfaces
Use a soft, damp cloth to clean the surfaces.
Remove external soiling immediately.
You can remove residue from the coffee
beans in the bean container with a soft cloth.
The cloth needs to be dry.
8.2 Cleaning the jug
Rinse the jug, the lid and the filter insert
with clear, warm water and a small quantity
of washing up liquid. You can also clean these
parts in the dishwasher.
8.3 Cleaning the grinder
Clean the grinder if you see visible soiling.
After each time you clean the grinder, you
should also clean the ground coffee chute, see
section 8.4 Cleaning the ground coffee chute on
page 22.
You can also watch a video of the
cleaning steps. To do this, simply
use the adjacent QR code.
Disassembling and cleaning the grinding
fineness regulator
1. Empty the bean container.
2. Allow the grinder to grind itself empty.
Do this by fitting a filter in the filter insert
and starting the grinding process with the
"Start/Stop" button.
» The appliance indicates that there are no
coffee beans in the bean container.
3. Turn the grinding fineness regulator until
the two triangles point towards each other.
4. Pull the grinding fineness regulator verti-
cally upwards out of the appliance.
5. Disassemble the grinding fineness regulator
as shown in the following picture.
To loosen the grinding ring (26),
turn it to the position shown.
6. Clean all parts of the grinder with the
brush.
You can remove the ground coffee from
the grinding ring by knocking it lightly. You
can also remove the ground coffee with a
vacuum cleaner.
Cleaning the appliance
24
25
26
21

Publicidad

loading

Este manual también es adecuado para:

Aromafresh pro x1030-011030-02Therm proTherm pro x