Descaling the appliance
If it is heavily soiled, you can clean the
grinding ring under running water. Allow
the grinding ring to dry completely.
7. Clean the lower grinding disc (29), the
gap (27) and the entrance to the ground
coffee chute (28). You can remove loose
ground coffee with a vacuum cleaner.
Loosen caked-on ground coffee with the
brush.
Fitting the grinding fineness regulator
All parts of the grinding fineness regulator
must be completely dry.
1. Reassemble the grinding fineness regulator.
Make sure you press the silicone gas-
ket (25) evenly and as far as it will go into
the grinding ring (26).
To lock the grinding ring, turn it to
the position shown.
2. Insert the grinding fineness regulator ver-
tically into the appliance. The two triangles
must point towards each other.
3. Press the grinding fineness regulator down
gently and turn it clockwise to the stop.
8.4 Cleaning the ground
coffee chute
1. Empty the bean container.
2. Allow the grinder to grind itself empty.
Do this by fitting a filter in the filter insert
and starting the grinding process with the
"Start/Stop" button.
22
» The appliance indicates that there are no
coffee beans in the bean container.
3. Open the hinged filter holder.
4. Clean the area above the hinged filter with
the brush and a moist cloth.
27
28
29
5. Open the flap for the ground coffee chute
by selecting Clean mill > Ground coffee chute
> Open in the menu.
6. Clean the ground coffee chute with the
brush. Make sure that you also clean the
parts that are further inside.
7. Close the flap for the ground coffee chute
by selecting Clean mill > Ground coffee chute
> Close in the menu.
8. Close the hinged filter holder.
9 Descaling the
appliance
9.1 Descale program
After you have used the appliance for a while,
limescale deposits will build up inside it. To
ensure that your appliance works perfectly
and has a long life, you need to descale it on a
regular basis.
The Descale program removes the limescale
deposits. You should run the program every
four weeks or when the red drop on the
screen asks you to do so. The program takes