Bosch BGS 4 Serie Instrucciones De Uso página 41

26 Drill dust nozzle*
27 Hard furnishings brush*
28 Hard-floor nozzle*
29 TURBO-UNIVERSAL® brush for floors*
30 Hard-floor nozzle*
Replacement parts and special accesso-
ries
A TURBO-UNIVERSAL® brush for upholstery BBZ42TB
All-in-one brushing and vacuuming of
upholstered furniture, mattresses,
car seats, etc. Especially suitable for
picking up pet hair. The brush roller
is driven by the suction air flow
through the vacuum cleaner.
No separate electric connection is
needed.
B TURBO-UNIVERSAL® brush for floors BBZ102TBB
All-in-one brushing and vacuuming
of rugs and carpets as well as all
hard floor coverings.
Especially suitable for picking up
pet hair. The brush roller is driven
by the suction air flow through the
vacuum cleaner.
No separate electric connection
is needed.
C Hard-floor nozzle BBZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
D Hard-floor nozzle BBZ124HD
With 2 rotating brush rollers
For caring for expensive hard floors
and for the improved collection of
coarse dirt.
Initial use
1
Fig.
Push the flexible hose adapter into the air intake
opening on the appliance and lock it in place. You
will hear an audible 'click'.
2*
Fig.
a) Telescopic tube without accessory connection:
Push the handle into the telescopic tube.
b) Telescopic tube with accessory connection:
Push the handle into the telescopic tube until it
locks into place.
3*
Fig.
a) Nozzle without accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle.
b) Nozzle with accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle until it locks in place.
4*
Fig.
Unlock the telescopic tube by moving the sliding
switch or adjusting sleeve in the direction of the ar-
row, and adjust it to the desired length. The slide
resistance on carpet is at its lowest when the tele-
scopic tube has been completely pulled out.
5*
Fig.
a) Place the accessories holder in the required positi-
on on the telescopic tube.
b) Use some pressure to insert the upholstery nozzle
with brush ring and the crevice nozzle into the ac-
cessories holder from above or below.
6*
Fig.
Attach the accessories holder to the multi-purpose
nozzle and clip it onto the suction pipe/telescopic
tube.
Fig.
7
Holding the power cord by the plug, pull it out to the
required length and insert the plug into the mains
socket.
8
Fig.
To switch the vacuum cleaner on or off, press the
ON/OFF button.
Controlling the suction level
Fig. 9
Turn the control knob to infinitely adjust the suction
level to the level required.
Low power range
= For vacuuming delicate materials, e.g. delicate >
upholstery, curtains, etc.
Medium power range
= For daily vacuuming of lightly soiled floors. >
High power range
= For vacuuming durable floor coverings, hard floors >
and heavily soiled surfaces.
* Dependent on model
39