Futurelight EYE-18 Manual Del Usuario página 30

Follow the instructions mentioned at the bottom of the base.
the structure (truss) to which you are attaching the fixtures is secure.
The Moving-Head can be placed directly on the stage floor or rigged in any orientation on a truss without
altering its operation characteristics (see the drawing).
Before taking into operation for the first time, the installation has to be approved by an expert!
Use 2 appropriate clamps to rig the fixture on the truss.
Make sure that the device is fixed properly! Ensure that
DANGER TO LIFE!
CAUTION!
The fixture's base enables to be mounted in
two ways.
For overhead use (mounting height >100 cm),
always install a safety-rope that can hold at
least 12 times the weight of the fixture. You
must only use safety-ropes with quick links with
screw cap. Pull the safety-rope through the
hole on the bottom of the base and over the
trussing system etc. Insert the end in the quick
link and tighten the fixation screw.
The maximum drop distance must never
exceed 20 cm.
A safety rope which already hold the strain of a
crash or which is defective must not be used
again.
30/80 51841300_V_1_2.DOC