Descargar Imprimir esta página

AEG Electrolux COMPETENCE KB68004-5-M Manual Del Usuario página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• If the oven cavity is heavily soiled, you may want to leave the solution to soak for a
short time.
• Close the oven door
• Select the "Bottom" function at a temperature of 220°C
• Select with the Timer a period of 5 minutes
• After the cycle is fi nished please wait 15 minutes before opening the door.
• Make sure that the appliance is switched off.
• Use the large absorbent sponge to remove any excess of water from the base of the cavity.
• You can now clean the inside of the oven
• Make sure at the end to dry all the inside and the surround of the appliance,
particularly the door seals.
Care and Cleaning
Caution!
Before carrying out any work, the appliance must be disconnected from the mains
electricity supply.
Cleaning the Inside of the Oven
• The inside of the oven should be cleaned to remove food and grease deposits, which
can give off smoke or odours and cause stains to appear.
• With the oven cold and for enamelled surfaces (e.g. the fl oor of the oven) use a nylon
brush or sponge with warm soapy water. If using special oven cleaning products,
use only on enamelled surfaces and follow the manufacturer's instructions.
Caution!
Do not clean the inside of your oven with a steam or pressurised water jet. Do not use
either metallic scouring pads or any material that could scratch the enamel.
Cleaning the Oven Exterior and Accessories
Clean the outside of the oven and the accessories with warm soapy water or with a
mild detergent.
Caution!
Never use metallic scouring pads or commercial or scouring powders that could scratch
the enamel. For stainless steel surfaces, proceed with care and only use sponges or
cloths that cannot scratch them.
To clean the outside of the oven do not attempt to remove the controls, as for this,
the oven has to be fi rst removed from the kitchen unit.
All manuals and user guides at all-guides.com
Care and Cleaning
17

Publicidad

loading