Descargar Imprimir esta página

Dreame DreameBot L20 Ultra Manual De Usuario página 12

Ocultar thumbs Ver también para DreameBot L20 Ultra:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Routine Maintenance
EN
Used Water Tank
1. Remove the used water tank, open its cover and pour out the used water.
2. Rinse the used water tank with clean water, and use the provided
cleaning tool to clean the inner wall of the used water tank.
Note: The float ball in the used water tank is a movable part. Do not
apply too much force when cleaning it to avoid damaging it.
20
Main Brush
1. Press the brush guard clips inwards to remove the brush guard and
lift the brush out of the robot.
2. Pull out the brush covers at both ends of the brush as shown in the
figure. Use the provided cleaning tool to remove any hair tangled in the
brush. Reinstall the brush covers on both ends of the brush, and then
reinstall the brush. Press on the brush guard to lock it in place.
Routine Maintenance
Side Brush & Mop Pad Holder
Remove and clean the side brush and mop pad holder.
Omnidirectional Wheel
Note:
·
Use a tool such as a small screwdriver to separate the axle and tire of
the omnidirectional wheel. Do not use excessive force.
·
Rinse the omnidirectional wheel under the running water and put it
back after drying it completely.
Dust Box
1. Open the robot's cover and press the clip to remove the dust box.
2. Open the dust box cover and empty the dust box as shown in the diagram.
EN
21

Publicidad

loading

Este manual también es adecuado para:

Rlx41ce