Dreame DreameBot L20 Ultra Manual De Usuario página 6

Product Overview
EN
Base Station
Upper Cover
Cover of Base Station
Storage Bin
Dust Tank Cover
Washboard
Ramp Extension
Plate
8
Base Station Buttons
Leave / Dock Button
· Robot on the base station: Press to exit the base station
· Robot out of the base station: Press to return to the base station
Start / Pause Button
· Press to start or pause cleaning
Drying Button
· Press to make the base station start or stop drying the mop pads
Status Indicator
· Solid White: The base station is connected to power
· Solid Orange: The base station has an error
Child Lock
Press and hold the buttons and for 3 seconds to activate or
deactivate Child Lock. After Child Lock is activated, all buttons on the
robot and the base station are locked.
Clean the Washboard
After the robot exits the base station, press and hold the button for 3
seconds to add water from the base station to the washboard, and then
press and hold the button for 3 seconds to pump out the used water
in the washboard.
Product Overview
Base Station
Cleaning Tool
Storage Bin
Cleaning Solution
Adding Inlet
Water Tank Clip
Float Ball
Used Water Tank Clean Water Tank
Note: The water hookup kit for auto refilling and draining needs to be purchased separately. (Only available in specific regions)
Dust Bag
Storage Bin
Filter
Dust Bag Slot
Dust Tank Cover Lock
Signaling Area
Automatic Water
Auto-empty Vents
Adding Outlet
Charging Contacts
Water Tank Clip Lifting Handle
Reserved Slot for Connecting
the Water Hookup Kit for Auto
Refilling and Draining
Filter
Power Port
Power Cord Holder
Floater
EN
9