Ego Power+ SNT2410 Manual De Funcionamiento página 28

MAKING A TURN (Fig. 13)
The wheels of the snow blower can be
disengaged using the right or left turn
lever to assist in making a right or left
turn when operating the snow blower.
1. Press the safety button and the power
indicator will light up solid green.
2. Press the self-propel trigger down
against the handle to activate the self-
propel function.
3. Squeeze the left of right turn lever to
make a turn:
◾
squeeze the left turn lever to disengage the left wheel from the self-propel motor
and the snow blower will turn left.
◾
squeeze the right turn lever to disengage the right wheel from the self-propel
motor and the snow blower will turn right.
◾
squeeze both levers at the same time to disengage both wheels from the self-
propel motor and the snow blower will stop moving.
WARNING:
blower will not stop immediately as the wheels will continue to rotate for a while due
to inertia. For your safety, do not release the handles of the snow blower until the snow
blower stops completely.
NOTE:
When the snow blower is pushed forward or pulled backward manually,
squeeze both levers at the same time, then the wheels will be disengaged from the
self-propel motor. This will make the manual moving be easier.
POWER INDICATOR ON THE SNOW BLOWER
The snow blower features a power indicator to communicate the charge level of the
battery pack(s) and the working status of the snow blower. The power indicator will
illuminate only when the snow blower is powered up.
NOTE:
For any faults that could not be solved, contact EGO service center for repair.
28
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2410/SNT2410-FC
When squeezing both levers to stop the self-propel motion, the snow
13
Left Turn
Lever
Left Wheel
Right Turn
Lever
Right
Wheel