Ego Power+ SNT2410 Manual De Funcionamiento página 29

POWER INDICATOR MEANING
Solid green
Flashing red
Solid orange
Orange, flashing
slowly
Orange, flashing
fast
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2410/SNT2410-FC
Snow blower is working
properly and each battery
pack has at least 15% of
its charge.
The battery pack(s)
charge is nearly depleted.
If both the auger-switch
trigger and the self-propel
trigger are activated or
only the auger-switch
trigger is activated,
the auger motor is
overheated.
If only the self-propel
trigger is activated, the
self-propel motor is
overheated.
The auger motor is
overloaded and augers
stop rotating.
If both the auger-switch
trigger and the self-propel
trigger are activated or
only the auger-switch
trigger is activated, the
augers are clogged and
do not rotate.
If only the self-propel
trigger is activated, the
self-propel motor is
overloaded and the snow
blower could not move in
self-propel mode.
ACTION
No action needed.
Stop the snow blower and
charge the battery pack(s).
Stop the auger rotation and wait
for some time to cool the auger
motor.
Stop the self-propel function and
wait for some time to cool the
self-propel motor.
Release the auger-switch trigger.
Restart the augers and slow
down your pace or decrease the
snow clearing cut width when
working.
Remove the battery pack(s).
Check and clear any snow or
debris that has collected beneath
or is lodged in the augers.
Remove the battery pack(s).
Check and clear any snow or
debris between the wheels and
the machine body.
29