Descargar Imprimir esta página

Case C9400DFS Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY
This product has been designed with internal grounding
or bonded neutral. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current
to reduce the risk of electric shock.
Improper grounding can result in a risk of
electrocution. Check with a qualified electrician for
your local requirements if you are in doubt as to
whether the unit is properly grounded.
• This generator is equipped with a grounding terminal for added
protection. Using the ground path from the generator to an
external ground source as instructed in the section labeled
"Grounding Instructions" in the Preparation section of this
manual can be necessary. Please consult a qualified electrician
for local regulations.
• The generator is a potential source of electrical shock if not
kept dry.
• Keep the generator dry and do not use in rain or wet conditions.
To protect from moisture, operate it on a dry surface under
an open, canopy-like structure. Dry your hands if wet before
touching the generator.
• Plug appliances directly into the generator. Or, use a heavy duty,
outdoor-rated extension cord that is rated (in watts or amps) at
least equal to the sum of the connected appliance loads. Check
that the entire cord is free of cuts or tears and that the plug has
all three prongs,especially a grounding pin.
• NEVER try to power the house wiring by plugging the generator
into a wall outlet, a practice known as "back feeding". This is an
extremely dangerous practice that presents an electrocution
risk to utility workers and neighbors served by the same utility
transformer. It also bypasses some of the built-in household
circuit protection devices. If you must connect the generator
to the house wiring to power appliances, have a qualified
electrician install the appropriate
with local electrical codes.
DANGER
equipment in accordance
7

Publicidad

loading