Sauder Via Serie Instrucciones De Montaje página 12

Step 8
å
Push three LEVELER BRACKETS (32G) over the holes in the bottom edges
of the ENDS (A and C).
å
Use a hammer to drive a PROPEL NUT (14M) into the holes in the LEVELER
BRACKETS (32G) and ENDS (A and C). Now, turn a LEVELER (16E) into
each PROPEL NUT.
å
NOTE: To raise a corner of the unit, turn the LEVELER counter-clockwise. To
lower a corner, turn the LEVELER clockwise.
Page 12
L-Shape Assembly
C
401446
A
32G
14M
16E
www.sauder.com/service