Sauder Via Serie Instrucciones De Montaje página 13

Step 9
å
NOTE: Before beginning this step, separate the BLACK 7/8"
LARGE HEAD SCREWS (17S) and BLACK 9/16" LARGE
HEAD SCREWS (1S). Do not confuse these SCREWS.
å
Fasten the LARGE END (C) to the BACK (E). Tighten four
TWIST-LOCK® FASTENERS.
å
Fasten two CORD MANAGERS (65P) to the BACK (E). Use
two BLACK 9/16" LARGE HEAD SCREWS (1S).
Dowel end
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
www.sauder.com/service
L-Shape Assembly
i t h
e w
®
f a c
C K
S u r
- L O
I S T
E R S
T W
T E N
F A S
C
FASTENER
®
BLACK 9/16" LARGE HEAD SCREW
(2 used for the CORD MANAGERS)
Notch
65P
E
401446
2
1S
Edge with
TWIST-LOCK®
FASTENERS
Page 13