Sauder Via Serie Instrucciones De Montaje página 7

Step 3
å
Push two LEVELER BRACKETS (32G) over the holes in the bottom edges of
the ENDS (A and B).
å
Use a hammer to drive a PROPEL NUT (14M) into the holes in the LEVELER
BRACKETS (32G) and ENDS (A and B). Now, turn a LEVELER (16E) into each
PROPEL NUT.
å
NOTE: To raise a corner of the unit, turn the LEVELER counter-clockwise. To
lower a corner, turn the LEVELER clockwise.
www.sauder.com/service
U-Shape Assembly
A
B
401446
32G
14M
16E
Page 7