Sauder Whitaker Point Serie Instrucciones De Montaje página 33

Step 27
å
Carefully stand your unit upright.
å
Pull the lower wing of the INTERLOCK MECHANISM (10) forward until it clicks into place as shown in Diagram 1.
å
To insert the LOCKING DRAWER (N) into your unit, line up the EXTENSION SLIDES on the drawers with the
EXTENSION RAILS on the unit, and push the drawer into the unit until the drawer it is fully inserted.
å
NOTE: The lower DRAWER ACTUATOR will be near the top of the RIGHT DRAWER SIDE as shown in Diagram 2.
å
Pull the upper wing of the INTERLOCK MECHANISM (10) forward until it clicks into place as shown in Diagram 3.
å
Insert the UPPER DRAWER (G) by lining up the EXTENSION SLIDES on the upper drawer with the EXTENSION RAILS
on the unit as shown in Diagram 4. Push the drawer in until it is fully inserted.
1
3
429374
10
Pull the lower
wing forward until
it clicks into place.
Pull the upper
wing forward until
it clicks into place.
10
www.sauder.com/service
N
4
G
2
The Lower Drawer
ACTUATOR must
be here.
The Upper Drawer
ACTUATOR must
be here.
Page 33