HP PageWide XL Serie Manual página 6

Take special care with zones marked with warning labels.
Ventilation measures for your location, whether it be the office, copy room, or
print room, should meet local environmental health and safety (EHS) guidelines and
regulations.
Electrical shock hazard
The printer uses a power cord that must always be unpluged to service the printer.
WARNING!
operate at hazardous voltages capable of causing death or serious personal
injury.
The printer requires a building installation circuit breaker, which must meet the
requirements of the printer and should be in accordance with the Electrical Code
requirements of the local jurisdiction of the country in which the equipment is
installed.
To avoid the risk of electric shock:
● The printer must be connected to earthed mains outlets only.
● Avoid overloading the printer's electrical outlet with multiple devices.
● Do not remove or open any closed system covers or plugs.
● Do not insert objects through slots in the printer.
● Take care not to trip over the cables when walking behind the printer.
● Insert the power cord securely and completely into the wall socket and printer
inlet.
● Never handle the power cord with wet hands.
Fire hazard
To avoid the risk of fire, follow all the precautions.
● The customer is responsible for meeting the printer's requirements and the
Electrical Code requirements according to the local jurisdiction of the country
where the equipment is installed. Use the power supply voltage specified on
the nameplate.
● Use only the power cord supplied by HP with the printer. Do not use a
damaged power cord. Do not use the power cord with other products.
4 Chapter 1 HP PageWide XL Printer Series HP PageWide XL Pro Printer Series Introductory
Information
The internal circuits of the built-in power supplies and power inlet