Astoria Core200 Manual De Uso Y Mantenimiento página 39

6.6.4 Raised cup grilles
When using cups with different heights, the special
flippable grilles that are supplied with the machine can
be used.
To use the grille, unhook it from the latch and rotate
it downwards into a horizontal position.
When it is no longer
needed, push it upwards,
until it latches into place.
To clean the grilles,
see paragraph "8.5.1 Gen-
eral instructions" on page
46.
6.6.5 Cup warmer
Place the cups to be heated on the cup heater (17).
and turn the cup heater switch to ON (23).
17
Confirm that the light (24) on the front of the machine
is on, as it indicates that the cup-heating system is active.
0
1 2
For safety reasons, we do not recommend placing cloths or other
objects on the cup warmer shelf in order to prevent the machine
from overheating.
User manual
6.7
Dispensing coffee
6.7.1 AEP version
• Place the coffee cup under the dispensing
spout;
• Press the desired dispensing switch (1). The
coffee will begin being dispensed, and it can
be stopped using the same switch once the
desired amount of coffee has been obtained
in the cup.
6.7.2 SAE version
• Place the coffee cup under the
dispensing spout
• press the desired dose button,
for example
coffee to finish being dispensed;
• To stop the coffee dispensing
ahead of time, press either the
button;
• Use the manual button
push-button panel anomalies oc-
cur or to continuously dispense
coffee.
23
When using small-sized cups, a specific raised cup grille (20) is
available.
To programme the dispensing procedure, see chapter "7.1 Coffee
24
doses" on page 42.
Core200
and wait for the
if
20
1
39