Publicidad
Idiomas disponibles
Idiomas disponibles
Core200
The display (16) placed under each keypad will
count in seconds of the dispensing.
Do not remove the filter holder from the dispensing group when
coffee is being dispensed.
Do not insert your fingers or any other objects into the filter holder.
6.8
Dispensing with the steam wand
• Immerse the steam nozzle (5) in
the liquid to be heated;
• Rotate the valve knob anticlock-
wise (14);
• The quantity of steam will be
proportional to how much the
valve is open;
• To stop dispensing, turn the
valve's knob clockwise (14).
40
6.9
Dispensing with Autosteamer wand
• Immerse the steam nozzle into the
milk to be frothed;
0 5
• Press the hot frothed milk
button and wait for the steam to be
dispensed;
• To stop dispensing ahead of time, press
the
To optimally froth the milk, follow these simple rules:
14
• Only heat the amount of milk that you intend to use;
once heated, it will have to be completely poured out
of the jug and cannot be reheated;
• Froth the milk which should be at a temperature of
around 4°C.
6
Carefully move the steam nozzle using the specific anti-scald
rubber grip (6).
14
Avoid contact with the steam nozzle, do not place your hands or
other body parts near the steam nozzle tips
5
To keep the terminals of the steam spouts in perfect efficiency
it is suggested to carry out a short free dispensing at the end of
every use. Keep the tips clean at all times using a cloth dampened
in lukewarm water.
The use of the steam dispensing point (steam nozzle), must always
be preceded by condensation draining for at
least 2 seconds.
Leave the steam nozzle immersed in the milk
only for the heating time required.
Do not open the steam tap with the steam
spout immersed in milk while the machine
is off.
button again.
6
User manual
Publicidad
