Epson TM-H6000III Manual Del Usuario página 15

Power Switch Cover
See illustration B.
You can use the enclosed power switch cover to make sure that the power switch
is not accidentally pressed. Just press the cover into place to install it.
WARNING:
If an accident occurs when the power switch cover is attached, immediately
unplug the power supply cable to avoid fire.
Important Installation Notes
❏
For a serial interface, use a null modem cable.
❏
For a parallel interface, use an IEEE 1284 cable.
❏
For a USB interface, install the driver before connecting the printer.
Downloading Drivers, Utilities, and Manuals
Drivers, utilities, and manuals can be downloaded from one of the following URLs.
For customers in North America, go to the following web site:
http://www.epsonexpert.com/ and follow the on-screen instructions.
For customers in other countries, go to the following web site:
http://www.epson-pos.com/
Installing the Roll Paper
See illustration C. The arrow indicates the autocutter.
CAUTION:
Caution label for autocutter blade.
Note:
Do not use paper rolls that have the paper glued or taped to the core because they might
cause a paper jam.
To prevent paper jams, make sure that nothing obstructs paper coming out of the paper
exit, and do not pull the paper out of the printer.
Installing the Ribbon
See illustration D.
Use genuine Epson ERC-32 ribbon cassettes.
1. Turn on the printer. Turn the knob on the ribbon cassette. Open the front
cover of the printer, and insert the new ribbon.
2. Turn the knob 2 or 3 times, and check the ribbon position.
TM-H6000III with Image Scanner (Photo-ID Model) 5
English