Product Description; Unit Configuration - Oase BioTec Premium 80000 Instrucciones De Uso

- EN -
2

Product Description

2.1

Unit configuration

A Description
1 Container cover
2 Level detection device
Signals the water level in the filter system
−
3 Signal box with level detection device and temperature probe
The signal box is connected to the control system.
−
4 Rollers for guiding the filter drum
5 Temperature probe
monitors the water temperature
−
6 Filter drum with 6 screen elements
− screen elements for coarse dirt particles larger than 150 µm
7 Inner cover
− foam filter holder
integrated water level indicator
−
8 DN 110 outlet
9 Foam filters with holder
2x blue
−
2x red
−
− 2x violet
10 Rinsing pump for supplying the rinsing device
11 DN 75 dirt outlet with slide valve
12 Connection set, for connecting the Bitron
2 × 38 / 50 mm (1½ / 2 ") adapters
−
2 × 30° inlet bends
−
− 2 × union nuts
2 × flat seals 60 × 47 × 3 mm
−
13 Connection set, for connecting filter pumps
− 1 × 38 mm (1½ ") hose connector
1 × 50 mm (2 ") hose connector
−
1 × union nut for hose connector
−
− 1 × 40 ... 60 mm hose clip
1 × 90° (2 ") connection bend
−
1 × union nut for connection bend
−
− 1 × flat seal 56 × 43 × 3 mm
14 2 × 38 mm (1½") connection, closed with sealing plugs
optional connection for a Bitron UVC clarifier
−
15 50 mm (2 ") connection for connecting the filter pumps
16 DN 110 dirt outlet for coarse dirt
17 Drum motor for filter drum
the motor is connected to the control system
−
18 Dirt channel
− collects the coarse dirt and rinsing water from the screen elements
19 Rinsing device
sprays water at high pressure onto the screen elements to rinse off the coarse dirt
−
20 Grease for the drum seal
21 Control system
22 Connector for drum motor
23 Connector for signal box
24 Power cable
25 Connector for rinsing pump
26 Fuse holder
− Fuse protection of the control system with 5 × 20 mm, T8 A 250 V safety fuse
34