EdilKamin FANTASY Instalación Uso Y Mantenimiento página 39

automatic mode and adjust the temperature desired for the
regulate the operating power required to reach it.
Shutdown
shutdown procedure will begin and the countdown is
is running when the shutdown phase begins.
without leaving any unburnt material in the combustion
chamber and cool the stove), consists of:
was operating.
Never unplug the stove during the shutdown process.
electronic control board.
appears on the display).
seconds to access the time setting function and press the
options will appear:
option and access the selection of the number of programs
INSTRUCTIONS FOR USE
- 39
(same as before).
the day to which the program is to apply must be selected:
proceed with the settings of the programs in the same way
the number and times of interventions.
used, in addition to normal variability of the solid fuel
carried out automatically by the stove.
N.B.
stove does not replace the need for the user to vacuum the
stove when cold, prior to ignition).
Pellet reserve warning
Stoves are equipped with an electronic pellet detection
whilst the stove is in operation mode. For correct system ope-
ration, it is important that the following procedure is adhered
From now on the display will show the remaining pellets
Each time pellets are reloaded you must enter the quantity.
to enter this into the memory. For other quantities, or in the
event of an error, you can specify the quantity using the pellet
reserve menu as follows:
the residual load.
-
-